home
Wilkommen OM, (X)YL in meinem virtuellen Shop!
Software Defined Radio, einen riesigen Schritt vorwärts für Radio Amateure. Mindestens so groß ist wie der Schritt des Einseitenband nach Amplitudenmodulation oder des 19 set zum FT-250.

ParmaCom ist Importeur von Flex Radio Systems. Das sind auch die Produkte, die von zentraler Bedeutung sind  für uns.

Wir verkaufen auch verwandte Produkte.

Mit über 40 Jahren Erfahrung in diesem Markt, hoffe ich, mit, innovative, qualitativ hochwertige Produkte zu Diensten sein!

I2C board

A stand alone board that plugs into the FlexWire port and provides 16 open collector outputs for driving relays or systems to change antennas, bands and transverters.

The open collectors are capable of handling 50 volts at 500 mA. The output device is a ULN2803a. Since there are 16 outputs most applications can drive their loads (relays or ttl circuits) without decoding. Reference line is provided to protect from relay back voltage.

Only usable with a FLEX-5000 and DDutil

I2C board

A stand alone board that plugs into the FlexWire port and provides 16 open collector outputs for driving relays or systems to change antennas, bands and transverters.

The open collectors are capable of handling 50 volts at 500 mA. The output device is a ULN2803a. Since there are 16 outputs most applications can drive their loads (relays or ttl circuits) without decoding. Reference line is provided to protect from relay back voltage.

Only usable with a FLEX-5000 and DDutil

I2C board

A stand alone board that plugs into the FlexWire port and provides 16 open collector outputs for driving relays or systems to change antennas, bands and transverters.

The open collectors are capable of handling 50 volts at 500 mA. The output device is a ULN2803a. Since there are 16 outputs most applications can drive their loads (relays or ttl circuits) without decoding. Reference line is provided to protect from relay back voltage.

Only usable with a FLEX-5000 and DDutil

I2C board

A stand alone board that plugs into the FlexWire port and provides 16 open collector outputs for driving relays or systems to change antennas, bands and transverters.

The open collectors are capable of handling 50 volts at 500 mA. The output device is a ULN2803a. Since there are 16 outputs most applications can drive their loads (relays or ttl circuits) without decoding. Reference line is provided to protect from relay back voltage.

Only usable with a FLEX-5000 and DDutil

I2C board

A stand alone board that plugs into the FlexWire port and provides 16 open collector outputs for driving relays or systems to change antennas, bands and transverters.

The open collectors are capable of handling 50 volts at 500 mA. The output device is a ULN2803a. Since there are 16 outputs most applications can drive their loads (relays or ttl circuits) without decoding. Reference line is provided to protect from relay back voltage.

Only usable with a FLEX-5000 and DDutil

I2C board

A stand alone board that plugs into the FlexWire port and provides 16 open collector outputs for driving relays or systems to change antennas, bands and transverters.

The open collectors are capable of handling 50 volts at 500 mA. The output device is a ULN2803a. Since there are 16 outputs most applications can drive their loads (relays or ttl circuits) without decoding. Reference line is provided to protect from relay back voltage.

Only usable with a FLEX-5000 and DDutil