FLEX-6300

Flex-Radio
    Delivery time:plm 8 dagen
Add to cart
  • Description
  • More

Software Defined Radio, 100 Watt Transceiver, 160-6m. RX 30 kHz - 54 MHz. inc. Smart SDR

FLEX-6300 for the Serious Amateur

See for more information www.flexradio.com

The FLEX-6300™ is for the amateur operator who wants to experience the magic of software defined radio in the highest performance 100W transceiver family available today. 

The FLEX-6300 provides an entry point into multi-dimensional amateur radio operations from CW to the latest digital modes.  Providing dual panadapters and waterfall displays, as well as two full-performance slice receivers, the FLEX-6300 opens up new operating capabilities at an affordable price.

Receiver Specifications

  • Receiver Architecture: Direct Digital Sampling
  • Spectral Capture Units: One (1)
  • Maximum Slice Receivers: Two (2)
  • Maximum High Resolution Spectrum Displays: Two (2)
  • Maximum Panadapter Width:  7 MHz
  • ADC Resolution:  16-bits
  • ADC Sampling Rate:  122.88 Msps
  • Wideband Frequency Coverage:  30 kHz – 54 MHz
  • DAX IQ Channels / Bandwidth Per Channel:  Two (2) @ 24 kHz – 96 kHz
  • DAX Audio Channels:  Two (2)
  • Amateur Band Preselector Coverage:  NA
  • Preamplifiers / Attenuators:  0 to +20 dB
  • Spurious and Image Rejection Ratio:  80 dB or better
  • External Powered Speaker Output Impedance Level:  600 Ohm Stereo Unbalanced

Transmitter Specifications

  • Transmitter Architecture:  Direct Digital Up-conversion
  • TX DAC Resolution:  16-bits
  • TX DAC Sampling Rate:  122.88 Msps
  • RF Output Power:  1-100W nominal SSB, CW, FM, RTTY, Digital; 1-25W nominal AM
  • Amateur Band Coverage at Rated Power Output:  160m – 6m
  • Low Pass PA Filter Bands:  160m – 6m ham band only
  • Transverter IF Output Power:  +0 dBm Typical; +10 dBm max
  • Transverter IF Frequency Coverage:  100 kHz – 54 MHz
  • Modulation System:  Digital Low Power at Carrier Frequency
  • Maximum FM Deviation:  5 kHz
  • DAX Transmit Channel:  Yes
  • Carrier / Unwanted Sideband Suppression:  <80 dBc typ / <80 dBc typ
  • Harmonic Radiation 1.8 – 50 MHz Amateur Bands:  <-50 dBc; -70 dBc 6m
  • Transmit Bandwidth:  Default 100-2900 Hz (Variable 50-10000 Hz)
  • Microphone Connector:  Unbalanced 8-pin Foster
  • Microphone Impedance:  600 Ohms Nominal (200-10kΩ)

Antenna Tuner Specifications

  • Matching Range 80m – 10m:  Optional, 8.3 Ohms – 300 Ohms
  • Matching Range 160 and 10m:  Optional, 16.7 Ohms – 150 Ohms

General Specifications

  • USB 2.0 Ports (peripheral control):  Two (2)
  • Master Clock Frequency:  122.88 MHz
  • Master Clock Phase Noise:  -140 dBc@10kHz
  • 10 MHz Reference Clock Stability:  0.5ppm TCXO
  • GPSDO Frequency Stability (GPS locked):  NA
  • Emission Modes:  USB, LSB, CW, RTTY**, AM, Synchronous AM, FM
  • Frequency Resolution:  1 Hz min.
  • Antenna Connectors:  SO-239×2, XVTRx1
  • Antenna Impedance (w/o tuner):  50 Ohm Unbalanced

Electrical

  • Power Supply Requirements:  +13.8V DC nominal ±15%
  • Current Drain (Receive/Transmit Max):  1.7A / 23A @ 13.8V

Mechanical

  • Height:  3.875″ (7.1 cm) with feet
  • Width:  13″ (33 cm)
  • Depth:  11.75″ (29.8 cm)
  • Weight:  Approximately 10 lbs. / 4.5 kgs
  • Operating Temperature:  0 to +50 degrees C; +32 to +122 degrees F

Options

  • Antenna Tuning Unit (ATU); greater than 3:1 on 80-10m, up 2.5:1 on 160 and 6m
  • Front Handle Kit (adds 1 inch/2.5 cm to total depth

Specifications subject to change without notice.
** Requires 3rd party software..

Related Products